What's new:
- Resolution change support
- Digital zoom support
Bugfixes:
- improved stability
- automatically resets if cpu hangs due to power lack or fluctuations
Step-by-step upgrade process:
1. Switch off Minla HDW and open enclosure by unscrewing 4 screws on back cover. You will see pcb with microsd card. Carefully remove microsd card (do not bend camera flex pcb without a reason) and insert it in your PC.
2. Download microsd card image from here (archived with XZ):
Step-by-step upgrade process:
1. Switch off Minla HDW and open enclosure by unscrewing 4 screws on back cover. You will see pcb with microsd card. Carefully remove microsd card (do not bend camera flex pcb without a reason) and insert it in your PC.
2. Download microsd card image from here (archived with XZ):
3. Flash image to microsd card by using any flashing software (for example https://etcher.io/on Windows or "disks" on Linux).
4. After flashing process is completed open this file on microsd card:
/minlahdw/config.json
and find string
"uid": "place_your_id_here"
change "place_your_id_here" to your Minla HDW UID.
Please note that UID must remain in quotes. So final string must look something like:
"uid": "ITjonwk3245221",
5. Save changes, insert card back to Minla HDW and close plastic enclosure.
6. Connect Minla HDW to flight controller.
7. Download new MinlaHDWapp here:
No comments:
Post a Comment